Reach and wash type window cleaning, and water usage.


by Peter Fogwill - Date: 2008-05-12 - Word Count: 422 Share This!

How much water do I need for a days window cleaning, and how fast should I have the water coming out the brush?? This question seems to be the most read posting on the water fed pole board on the window cleaning forum. The answer is a hard one, and I usually tell prospective customers who ask, "it depends on how fast a worker you are". A slow worker on a fast water flow will waste quite a bit of water over the day, whereas a fast worker on a slow water flow will waste a lot of time in the day, as he will be waiting around for the window to have enough water passed over it to wash the window properly.

I have seen on numerous occasions while observing window cleaners using a water fed pole while window cleaning, using far too much water on a single window. People seem to brush the glass then rinse far too much, far more than is necessary for a perfect finish. When I see or hear of people using too much water I usually tell them to clean the windows as normal preferably on a building they are going to be cleaning the insides as well. I tell them to clean a couple of windows spending half the time and using half the water, then thoroughly check all the windows while cleaning the insides. They are usually very surprised with the results, with no difference between the windows they have cleaned normally, and the ones they used half the time, and half the water on.

It also depends on what type of windows you will be cleaning, domestic or commercial. Domestic uses less water as the pole is being heightened and lowered more than in commercial. Another thing that will determine water usage is the type of jets you use, fan spays will use less water than pencil jets as they make better use of the watter spraying water under more pressure to the very edges of the glass. Last but not least is the way you turn the water on and off while working. If you have to keep stopping what your doing to turn the water off between windows you will tend to keep the water running between windows, this tends to waste a lot of water in the day.

Its only when you get into the swing of things and find out what settings are best for you, will you find out how much water you personally will need for your days work

Related Tags: window cleaning, reach and wash, reach wash, reach & wash

I developed a system for stopping the water easily at the brush to save such water, it can be seen at http://www.window-tools.com/auto.htmPeter can be contacted on the above site for more water usage information. Your Article Search Directory : Find in Articles

© The article above is copyrighted by it's author. You're allowed to distribute this work according to the Creative Commons Attribution-NoDerivs license.
 

Recent articles in this category:



Most viewed articles in this category: