Preparing Items For Decoupage
- Date: 2007-06-14 - Word Count: 471
Share This!
Wood
Lightly sand any rough spots. Fill rough spots and holes with wood filler and then sand. Wipe with a damp sponge. If you want a stained background, use a water-soluble, alcohol-based wood stain. You may need to seal the wood.
You can apply your cutout directly onto untreated wood, but it's better to apply a sealer. Before sanding wood paint a base coat first as the water-based paint lifts the fibers of wood way from the surface so when you sand the paint the fibers are easily removed. The first coat of paint highlights imperfections that you can correct with filler.
When using a wood base, remember that oil and water don't mix. The most common decoupage glazes are water-based and won't adhere properly to wood that has been stained with an oil-based stain.
If you've stained wood with an oil-based stain, you need to seal it with an oil-based sealer. If you want to decoupage a piece of old furniture and aren't sure of the finish, find an inconspicuous spot to test your glaze.
Glass
Wash your glass item with soap and water, rinse thoroughly, and wipe dry. Wipe the surface with rubbing alcohol or vinegar and allow to dry before working on the surface. Don't touch the surface once it has been cleaned as oil from fingers can cause your images to not seal properly.
You need to be extra careful to remove any excess glue from the glass surface, once your prints are applied. It's also very important to work on a clean surface. When using PVA glue on glass, add a drop of glycerin to prolong the drying time. Once you have applied your cutout to the glass surface and allowed the glue to dry, you can remove any glue by wiping the glass with a window cleaner. Don't apply glue to the image, only to the glass. Don't worry about leaving too much glue between the glass and the image as it will dry clear. The more glue you work with, the easier it is to get rid of bubbles. Similarly, it's ok to leave a thin film of glue both on the glass and the back of the image.
Spray a small amount on a damp sponge or cloth and remove any excess glue from the glass. Cotton swabs work well to remove glue from small areas.
Plastic
To decoupage on plastic, you need to roughen the plastic first with sandpaper. This will give it some tooth with which to grab and provide a tight seal. You will need to allow extra drying and extra curing time than with other surfaces. Dry to the touch isn't enough. Lightly press your finger in an area that won't show to test it if possible. If not, allow several days for drying to be on the safe side. Keep the object protected against dust while it's drying.
Lightly sand any rough spots. Fill rough spots and holes with wood filler and then sand. Wipe with a damp sponge. If you want a stained background, use a water-soluble, alcohol-based wood stain. You may need to seal the wood.
You can apply your cutout directly onto untreated wood, but it's better to apply a sealer. Before sanding wood paint a base coat first as the water-based paint lifts the fibers of wood way from the surface so when you sand the paint the fibers are easily removed. The first coat of paint highlights imperfections that you can correct with filler.
When using a wood base, remember that oil and water don't mix. The most common decoupage glazes are water-based and won't adhere properly to wood that has been stained with an oil-based stain.
If you've stained wood with an oil-based stain, you need to seal it with an oil-based sealer. If you want to decoupage a piece of old furniture and aren't sure of the finish, find an inconspicuous spot to test your glaze.
Glass
Wash your glass item with soap and water, rinse thoroughly, and wipe dry. Wipe the surface with rubbing alcohol or vinegar and allow to dry before working on the surface. Don't touch the surface once it has been cleaned as oil from fingers can cause your images to not seal properly.
You need to be extra careful to remove any excess glue from the glass surface, once your prints are applied. It's also very important to work on a clean surface. When using PVA glue on glass, add a drop of glycerin to prolong the drying time. Once you have applied your cutout to the glass surface and allowed the glue to dry, you can remove any glue by wiping the glass with a window cleaner. Don't apply glue to the image, only to the glass. Don't worry about leaving too much glue between the glass and the image as it will dry clear. The more glue you work with, the easier it is to get rid of bubbles. Similarly, it's ok to leave a thin film of glue both on the glass and the back of the image.
Spray a small amount on a damp sponge or cloth and remove any excess glue from the glass. Cotton swabs work well to remove glue from small areas.
Plastic
To decoupage on plastic, you need to roughen the plastic first with sandpaper. This will give it some tooth with which to grab and provide a tight seal. You will need to allow extra drying and extra curing time than with other surfaces. Dry to the touch isn't enough. Lightly press your finger in an area that won't show to test it if possible. If not, allow several days for drying to be on the safe side. Keep the object protected against dust while it's drying.
Related Tags: decoupage
Karen's website has a Step by Step guide on Decoupage. Please visit her site for more info on decoupage sheets Your Article Search Directory : Find in Articles
Recent articles in this category:
- Kids Halloween Party Ideas
Hard to believe Halloween is just around the corner already. This is a very popular holiday especial - Inexpensive Party Favor Ideas For Party Guests
The cost of a gift is not the most important, but rather the thought behind it. There are different - The Major Benefits of Watching Funny Videos
Funny videos have gained a wide audience all over the world. This is due to the impact it has made i - Handy Things to Know About Concert Tickets
There are a lot of people that spend time and money going to concerts. This makes knowing the facts - Travel Magazine And How To Pick Up A Good Copy
Many people enjoy reading magazines. They are a quick read and can be picked up in many locations. M - Planning the Infamous Holiday Office Party
Ok, so you're in charge of planning the infamous holiday office party. If you've ever seen the TV sh - How to Choose Songs That Are Suited to Your Voice - So You Always Sound Fantastic!
Hello singers! In this article, you'll learn how to choose songs that compliment your voice… so you - Host a Professional Halloween Quiz This Halloween
If you are having a bunch of friends around for Halloween, why not give them a Halloween Quiz? If yo - Discovering How Popular Horror Movies Can Enhance Halloween Fun
Throwing a Halloween party? Why not make it a night with themes from popular horror movies? For, wit - The Art Of The French Revolution
The art of pre-revolutionary France was decidedly frivolous in its subject matter and deliciously de
Most viewed articles in this category:
- The Complete Defenition of the 3D
3D computer graphics as seen on FaceYourArt.comA 3D rendering with raytracing and ambient occlusion - Unlimited Movie Downloads Tips - Pick the Best, Dump the Rest
Unlimited movie downloads have made it much easier for busy folks like us to watch our favorite movi - Get Your Alliance Character To 60 In A Week
You may have looked around on the internet for WoW power leveling guides and come up empty-handed or - Why Do We Gamble?
Why do People Gamble? Gambling is a past-time activity enjoyed by many people. Some play at hom - Video Poker (jacks or Better) Tips
Video poker made its entry in the 1970s. It has proven to be a popular form of gaming. Video poker o - Top 7 Video Games For Children Ages 5 - 8
Many parents worry about the video games available to children today with all the violence. However - Why I Love Strategy Games
A strategy game is one in which the skills of the play and his decision making combine to influence - Prison Break's Wentworth Miller: I'm not Gay
In an attempt to put a stop to the lingering gossip and to clarify his name once and for all, Wenthw - Guys, Valentine's Day will be Heaven or Hell for you...
Guys, I know it's not fashionable to get ahead of yourself for holidays. I don't buy Christmas gift - Comparing 6 String And 12 String Guitars
6-string or 12-string Acoustic guitar, which should you get? Both have pros and cons, and both are e