Shooting a Wedding Video? Say Goodbye To the Confusion of Operating Your Video Camera
- Date: 2007-03-27 - Word Count: 904
Share This!
If you are planning to shoot a wedding video, and your only prior experience with using a video camera is the footage you shot at your three year old's birthday party, then here's a chance to quickly and easily learn the most important camera functions and their optimal settings.
1. The on/off function
If you don't know how to turn your camera on, then you're out of luck. Different cameras place their on/off power buttons in different locations. You know your camera's power is on if you see an image in the viewfinder or flip-out screen. Note: Don't forget to remove the lens cap.
2. Menu functions
There are some settings in your camera that need to be adjusted/set before you videotape the wedding. They are accessed through the Menu button on your camera. These functions and their optimal settings include:
Time/date - Off
No matter how professionally you shoot the wedding, if you leave the time/date function on you will look like an amateur.
Focus - Auto
Exposure - Auto
White Balance - Auto
The only time you need to change these settings to" Manual" is when lighting conditions or picture composition are out of the norm.
(e.g. adjust for exposure: heavily back-lit subjects making them look like they're in a Witness Protection program; adjust for focus: competing objects in foreground that make your camera continually roll focus back and forth with nauseating results...like looking through your grandfather's bifocals.
Gain level - 0
Increase gain level only when light levels are low. You should be aware that increasing gain levels will affect the quality of your videotape. However, so does darkness. Increasing gain level may be your only choice in this situation.
Record mode/speed - SP (Standard Play)
Your camera may have additional record modes/speeds including: EP (Extended Play), LP (Long Play) and SLP (Super Long Play) These record modes are designed to extend the record time you have on your videotape. If you find that the wedding is running longer than expected and you do not have additional videotape, changing the record speed to EP, LP or SLP will give you more record time on the tape. You should be aware that using these slower modes will result in some loss of quality.
3. Battery insertion
Become familiar with camera battery insertion. Trying to figure this out in a dimly-lit church during the wedding ceremony is going to spell big trouble for you.
Also, remember to keep track of the remaining power level of the batteyr by observing the battery level display in the viewfinder.
5. Zoom function
Zoom controls on a video camera usually include buttons or slide control marked W (wide) and T (telephoto). You should become familiar with the sensitivity of these controls. This is similar to becoming familiar with the sensitivity of the brakes on a new car.
6. Microphone input jacks
If your camera has a mic input jack, you will be able to plug in an external microphone which will enhance the quality of your audio while giving you more range and flexibility with your camera.
7. Headphone input jack
Plug a headphone set into this jack so that you can check the quality and level of audio you are receiving into the camera while recording or during playback.
8. Videotape insertion
This is something you should know well before coming to the church. Different cameras require specific tape insertion methods. Improper tape insertion can have damaging effects on your camera. If you are unsure, take your camera and videotape to a video camera dealer that can help you with this matter.
9. Tripod
Even though is not a function found on the camera, a tripod is an essential adjunct to proper camera operation. Correctly extending and locking the tripod legs, attaching the camera to the tripod quick-release plate and operating the pan/tilt locks and handle are tasks and skills that must be mastered before attempting to shoot the wedding.
10. View finder or flip out monitor
Older cameras have viewfinders which are used to help you see what you are shooting/videotaping. You can adjust the focus of the viewfinder for your vision by using the diopter which is a small wheel attached to the viewfinder.
Newer camera models usually include a flip-out screen monitor which functions like the viewfinder but with an easier-to-see display. Although more convenient for viewing, the flip-out screen requires more battery power. So if you find yourself running low on battery power, close the flip-out screen and use the viewfinder. (Both will not work at the same time. You must use one or the other.)
Viewfinders and flip-out screens also provide a readout of the status of several camera functions such as Record, Pause, Stop, record speed, battery power level and videotape used and/or remaining. Think of these displays like the gauges on you car dashboard.
11. Record
Just because your camera may be turned on doesn't mean that you are capturing any video. You must push the Record button if you want to have something to playback to the bridal couple later. Once you push the record button, your viewfinder should display a red REC or red dot indicator, which verifies that the camera is recording. Another indication that you are recording will be a running time code display, also in your viewfinder/flip-out screen.
Just remember, fear and anxiety come from not being prepared. Becoming familiar with these basic video camera functions and settings will help you to be relaxed, confident and looking forward to capturing a once-in-a-lifetime event that the bride and groom will treasure forever.
1. The on/off function
If you don't know how to turn your camera on, then you're out of luck. Different cameras place their on/off power buttons in different locations. You know your camera's power is on if you see an image in the viewfinder or flip-out screen. Note: Don't forget to remove the lens cap.
2. Menu functions
There are some settings in your camera that need to be adjusted/set before you videotape the wedding. They are accessed through the Menu button on your camera. These functions and their optimal settings include:
Time/date - Off
No matter how professionally you shoot the wedding, if you leave the time/date function on you will look like an amateur.
Focus - Auto
Exposure - Auto
White Balance - Auto
The only time you need to change these settings to" Manual" is when lighting conditions or picture composition are out of the norm.
(e.g. adjust for exposure: heavily back-lit subjects making them look like they're in a Witness Protection program; adjust for focus: competing objects in foreground that make your camera continually roll focus back and forth with nauseating results...like looking through your grandfather's bifocals.
Gain level - 0
Increase gain level only when light levels are low. You should be aware that increasing gain levels will affect the quality of your videotape. However, so does darkness. Increasing gain level may be your only choice in this situation.
Record mode/speed - SP (Standard Play)
Your camera may have additional record modes/speeds including: EP (Extended Play), LP (Long Play) and SLP (Super Long Play) These record modes are designed to extend the record time you have on your videotape. If you find that the wedding is running longer than expected and you do not have additional videotape, changing the record speed to EP, LP or SLP will give you more record time on the tape. You should be aware that using these slower modes will result in some loss of quality.
3. Battery insertion
Become familiar with camera battery insertion. Trying to figure this out in a dimly-lit church during the wedding ceremony is going to spell big trouble for you.
Also, remember to keep track of the remaining power level of the batteyr by observing the battery level display in the viewfinder.
5. Zoom function
Zoom controls on a video camera usually include buttons or slide control marked W (wide) and T (telephoto). You should become familiar with the sensitivity of these controls. This is similar to becoming familiar with the sensitivity of the brakes on a new car.
6. Microphone input jacks
If your camera has a mic input jack, you will be able to plug in an external microphone which will enhance the quality of your audio while giving you more range and flexibility with your camera.
7. Headphone input jack
Plug a headphone set into this jack so that you can check the quality and level of audio you are receiving into the camera while recording or during playback.
8. Videotape insertion
This is something you should know well before coming to the church. Different cameras require specific tape insertion methods. Improper tape insertion can have damaging effects on your camera. If you are unsure, take your camera and videotape to a video camera dealer that can help you with this matter.
9. Tripod
Even though is not a function found on the camera, a tripod is an essential adjunct to proper camera operation. Correctly extending and locking the tripod legs, attaching the camera to the tripod quick-release plate and operating the pan/tilt locks and handle are tasks and skills that must be mastered before attempting to shoot the wedding.
10. View finder or flip out monitor
Older cameras have viewfinders which are used to help you see what you are shooting/videotaping. You can adjust the focus of the viewfinder for your vision by using the diopter which is a small wheel attached to the viewfinder.
Newer camera models usually include a flip-out screen monitor which functions like the viewfinder but with an easier-to-see display. Although more convenient for viewing, the flip-out screen requires more battery power. So if you find yourself running low on battery power, close the flip-out screen and use the viewfinder. (Both will not work at the same time. You must use one or the other.)
Viewfinders and flip-out screens also provide a readout of the status of several camera functions such as Record, Pause, Stop, record speed, battery power level and videotape used and/or remaining. Think of these displays like the gauges on you car dashboard.
11. Record
Just because your camera may be turned on doesn't mean that you are capturing any video. You must push the Record button if you want to have something to playback to the bridal couple later. Once you push the record button, your viewfinder should display a red REC or red dot indicator, which verifies that the camera is recording. Another indication that you are recording will be a running time code display, also in your viewfinder/flip-out screen.
Just remember, fear and anxiety come from not being prepared. Becoming familiar with these basic video camera functions and settings will help you to be relaxed, confident and looking forward to capturing a once-in-a-lifetime event that the bride and groom will treasure forever.
Related Tags: wedding, wedding ceremony, focus, exposure, wedding video, vide, video camera, microphone, camera functions, menu functions, white balance, gain level
Your Article Search Directory : Find in Articles
Recent articles in this category:
- Wedding Photographer Outlay
Weddings are special moments that ought to be shared with other people, especially with the future c - Wedding Song: Factors To Consider When Choosing A Wedding Song
A wedding song is a very important part of the wedding ceremony. For instance, songs are usually pla - Wedding Song: How To Choose A Wedding Song
A wedding song is an integral part of the wedding ceremony. The wedding will not be as meaningful or - Why Handkerchiefs Make Great Wedding Accessories
Handkerchiefs are an ideal accessory to add to any wedding because they carry significance and meani - Top 7 Money Saving Tips On Wedding Dresses Ideas
When preparing wedding for the big day, I am convinced that you will come upon wedding dresses choos - Wedding Reception Venues On Anna Maria Island
Anna Maria Island has one of the most striking and memorable beaches on the Florida coast. On the is - Anna Maria Island Wedding Planner
If you are looking for one of the most scenic and romantic spots on the coast line of America to get - Wedding Checklist - How To Get Started
Your wedding checklist will quickly become your bible as your plan everything for your big day from - Ideas To Find The Best Nashville Wedding Venue
Searching for the best place to get married in Nashville? Here are some ideas that you may find help - Colorado Springs Florists
This coming Celebration Season, florists in Colorado Springs will be happy to adorn all your parties
Most viewed articles in this category:
- Getting Married? Don't Feed The Band
So, you've picked out your reception hall and you've signed the best wedding band you've ever heard - Differences in Wedding Customs
There are other differences in wedding customs. In Russia, the bride and groom stay attached to each - When Things Go Wrong at Weddings
Usually at most weddings, something in the plans goes wrong. At our wedding, the limousine didn't sh - Tips on Garden Weddings
The 21st century has brought much change in the world of tradition. Once time honored traditions ha - Pharmacies offer deep discounts for buying Viagra online
The benefits of buying Viagra online (sildenafil citrate) are vast. First, it's confidential. - How to throw a French Themed Bridal Shower
Although the French themselves do not have the tradition of holding bridal showers, there is no rea - How to Dress All Your Bridesmaids to Look Their Best
You want your wedding to be fabulous. Fantastic, even! But there are so many headaches to deal wit - Weddings - A Matter of Perspective
When you decide to commit to someone for the rest of your life, you should start out on a high note - Ring in the New Year With Beautiful Bridal Jewelry for you and your Maids
This coming up year, brides are looking for unique and beautiful bridal and bridesmaid jewelry. Mor - and Don'ts for the Bride-to-be
Ladies, when it comes time to plan for your big day, do a little research on wedding traditions, bud