Helpful Tips For Replacing A Flat Tire Without Pulling Your Hair Out


by Gregg Hall - Date: 2008-09-02 - Word Count: 437 Share This!

A flat tire can be a harrowing experience especially if you are in a hurry to reach somewhere. Tire puncture that are caused by nails or cuts measuring up to one quarter inch can be repaired by professionals. However, if the tear is more than one quarter inches or if it is a sidewall puncture then the tire needs to be replaced.

Slow leaks, punctures, pinch cuts, blow outs are some types that causes a flat tire. In slow leaks, the tube in the tire must be replaced as it would be difficult to find the tear. Punctures are caused by sharp objects and generally the tear is patched up. Pinch cuts, caused by sharp edges, usually result in a dent in the rim. Blow outs are sudden let-off of air that is usually accompanied by a loud noise.

The first thing that you should do soon after realizing that you have a flat tire is to park the car in a safe place and turn on the parking lights. It would help if the emergency brake is on. It is best to park on a flat surface, as it would help in preventing the car from rolling once you wedge it up. To make matters easy, it is necessary that you possess a spare tire, a jack and a lug wrench.

Remove the flat tire first. To do this, you need to remove the hubcap with the help of a screwdriver or the flat end of a lug wrench. It makes the job much easier if there is no hubcap as some wheels do not need one. The hexagonal bolts in the hubcap, also known as lug nuts, can be removed using the lug wrench. The trick is to turn the lug wrench counter-clockwise if the lug nut has an R inscribed on it. If it has L, instead, then turn it clockwise. It is important that you loosen the lug nuts and not remove them altogether.

Lift the car up with the help of the jack. Pump the jack until the flat tire is totally off the ground. Now, you can remove the lugs that were loosened earlier.

Place the spare tire in position and make sure that the holes of the tires are in sync with the lug bolts. You can now tighten the bolts in the opposite direction that you used to remove them. Now remove all the wheel blocks that were placed to keep the car from moving.

Always ensure that you have your spare tire back in good shape as soon as possible as you never know when you would need it again.


Related Tags: trucks, cars, tires, wheels, car tires

Gregg Hall is an author living on the Treasure Coast of Florida. Now that you know how to change a tire easily be sure that you have quality tires for your car by going to http://www.Nsearch.com

Your Article Search Directory : Find in Articles

© The article above is copyrighted by it's author. You're allowed to distribute this work according to the Creative Commons Attribution-NoDerivs license.
 

Recent articles in this category:



Most viewed articles in this category: