Underfloor heating is as efficient as it is complicated. While researching for the salient features for this heating process, we made a list of a few questions and searched for their answers.

Here are some of the answers we received! We hope all these will help you understand the process of underfloor heating and make a decision on whether or not to go for it.

6.Can this peculiar mechanism be used as a stand-alone heat source?

This heating mechanism is very effective if you have a well insulated home. Well, this is not all as your home will need to comply with the current housing regulations and should be approved for underfloor heating installations. You'll need to check with your local housing authority in order to make sure if you can get it installed.

7.Can this mechanism be installed under all kinds of flooring?

Yes, this heat radiation mechanism can be used to under all kinds of floors. As added information, the mechanism works best with stone and tile flooring. However, it can also be used under wood flooring, vinyl flooring as well as linoleum. People often use thick rugs or carpets for insulation. This will only reduce its efficiency.

8.How much time does it take to heat up the floor once the mechanism is operational?

Well, this mostly depends on the sub-floor construction, i.e. the material used in constructing it. For example, if the builder used concrete for constructing it then it will take longer to heat up the room. On the contrary ply wood sub floors tend to heat up faster than before.

9.Will I require professional help in installing the setup?

The installation process is fairly simple and you'll be able to do it on your own without much hassle. In case you aren't too good, a do-it-yourselfer, we recommend that you hire a competent contractor to do the job for you. Get hold of a good electrician in order to make sure that the heater is connected to the thermostat properly.

10.My flooring has already been installed. How can I install the heater at this stage?

Well there is nothing much that can be done about it at this stage. The only way you can do it by ripping up the floor again and putting it back in its place, once the installation has been completed. There is no other way to go about it.

11.How soon can I make use of the system after it's been installed?

The system may take a few weeks before it gets operational. This is due to the fact that the tiles and the floor will take some time to mature, i.e. at least 2 to 3 weeks.

This is one of the most cost efficient heating mechanisms available today and is perfect for both homes as well as for industrial setups.

With all this information at hand, we hope you'll be able a decision on whether or not to choose underfloor heating.