Business News Articles - Dimmable LED Lighting - Energy Efficient Dimming Technology


by JOSH GEHLY - Date: 2010-01-12 - Word Count: 1022 Share This!

LED lighting over the past 40 years made great strides towards becoming a viable alternative for energy efficient lighting. Consistently used on indicator lights, LED diodes have increased in power and color options. Primary colored LED diodes last over 100,000 hours, but originally could not produce white light. Technology over the past five years has sufficiently produced warm white color temperatures by mixing all three primary colors or by converting monochromatic light from a blue LED to broad-spectrum white light. Phosphor based LED chips have a phosphor coating of different colors to produce white light.

High power LEDs chips can be driven at a high current, i.e, hundreds of mA (compare at tens of mA for other LEDs), and some LED chips operate at more than one ampere of current giving out large amounts of light. Since overheating is destructive, the high power LEDs must be highly efficient in overall design to minimize excess heat. Heat sinks diffuse the heat and provide the crucial component for longevity for LED fixtures and lights.

Because LED bulbs now have high power and warm white options, attention is now turned towards dimmability. Can LED lights dim? Has the LED technology advanced enough, or do most consumers need to wait a few more years for the next LED lighting revolution? Today, dimmable LED lighting provides an affordable, efficient, high quality lighting option on standard dimmers.

Low voltage lamps, like LEDs, require constant DC voltage or current for optimal operation. This allows LEDs to easily adapt to different power supplies safely while having longer standby power. Each LED needs 2-4V of DC power and several hundred mA of current. Having a series of LED diodes on a bulb or light fixture requires higher voltage, provided by the LED driver. An LED driver is a self-contained power supply that has output matched to the electrical characteristics of your LED or array of LEDs. It converts incoming voltage to the proper low-voltage DC power required by the LEDs. Drivers should deliver a consistent current over a range of load voltages.UL Approved, Dimmable PAR30

LEDs must be protected from line-voltage fluctuations because changes in voltage can produce a disproportional change in current, which in turn changes light output. LED light output is proportional to current and is rated for a current range. If current exceeds the manufacturer recommendations, the LEDs can become brighter but their light output can degrade at a faster rate due to heat, shortening useful life. The LED driver regulates the current flowing through the LED during operation and protects it from voltage fluctuations.

Dimming drivers can dim LEDs by a reduction in the forward current, pulse width modulation (PWM) via digital control, or more sophisticated methods. LED drivers are the crucial component in dimming technology for LED lighting solutions. LED diodes are easily integrated with circuits to control dimming and color-changing so that these functions can respond to preset commands or occupant presence or commands. The light output is proportional to the drive current. At the bottom end of the current range, the LED may flicker or change color. Because of this, dimming reductions in forward current often results in flickering of the LED bulb. Drivers may also offer dimming by means of pulse width modulation (PWM) circuits.

Most dimming drivers operate using the PWM method. With this method, the frequency could range from a hundred modulations per second to as high as hundreds of thousands of modulations per second, so that the LED appears to be continuously lighted without flicker. A benefit of the PWM method is that it enables dimming with minimal color shift in the LED output. Dimming causes LEDs to experience a similar shift in spectral power distribution as an incandescent lamp. However, if colored LEDs in an array are used to produce white light, the amount of shift, particularly with red and yellow LEDs, may produce an undesirable effect on the white light that is produced by the system.

Pulse width modulation presents a technique to safely dim an LED from 5% to 100% of full luminous flux. When the LED is pulsed with current while varying the duty cycle of the current waveform, the LED rapidly transitions between on and off. The relative times spent give the impression of being dimmed. Dimming design is based on technology of frequency and peak current modulation, which provides even and stable dimming. This technique is common for dimmable lights, especially incandescent. Another option allows each LED to be individually controlled and programmed by interfacing with DMX digital controller. This enables thousands of LEDs to dynamically dim up or down to create a seemingly infinite spectrum of colors.

Dimming does not result in a loss of efficiency. During dimming, the LEDs are still operated at the same voltage and current as during full light output. In addition, lamp life is not affected by dimming, as is sometimes the case with frequently dimmed fluorescent lighting. Rather, dimming LEDs may lengthen the useful life of LEDs, because dimming can reduce operating temperatures inside the light source.

Most LED drivers are compatible with commercially available 0-10V control devices and systems such as occupancy sensors, photocells, wallbox dimmers, remote controls, architectural and theatrical controls, and building and lighting automation systems. In the USA, most dimmers work on the basis of the TRIAC technology. Many LED drivers are tested and designed to work on these dimmer options. LEDs can also work with devices governed by the DMX and digital addressable lighting interface (DALI) protocols and, in the future, may include wireless (RF) as a control option.

The technology behind LED lighting continues to evolve and progress. The LED drivers dim LEDs by a reduction in the forward current via pulse control or through digital control. Most LED drivers are compatible with commercially available 0-10V control devices and systems such as occupancy sensors, photocells, wallbox dimmers, remote controls, architectural and theatrical controls, and building and lighting automation systems. Dimming compatible LED bulbs has no negative results on LED life. Dimmable LED lighting provides an affordable, efficient, high quality lighting option on standard dimmers.

For more information please visit: http://www.greenlightingled.com/Why-Green-Technologies/Green-White-Papers/Dimmable-LED-Lighting-Green-Paper.aspx


Related Tags: led, led lights, led technology, dimmable led, dimable led technology

Your Article Search Directory : Find in Articles

© The article above is copyrighted by it's author. You're allowed to distribute this work according to the Creative Commons Attribution-NoDerivs license.
 

Recent articles in this category:



Most viewed articles in this category: