Super High Temperature Blowers, Fans, Ventilators
- Date: 2008-10-20 - Word Count: 496
Share This!
A new design of high temperature fans and blowers for operating up to 2,200 F is introduced by Tenderall Blower Co. which has increased again the operating temperature limit of its unique line of super high temperature fans and blowers for industrial applications to 2200 F. This was achived by using extremely high strength stainless steel alloys for the fans impellers, that allow for higher safe speeds at elevated temperatures. High temperature exotic ceramics are also used for ventilator impellers.
The Tenderall high temperature oven fans line now include:
- Pre-engineered and custom made fans for all types of applications with vaiety of impeller types and accessories;
- Operating up to 2200 F, centrifugal, axial and plug fan types;
- Canada Blower engineers provide a professional advice and recommend a right fan for every application & oven / plenum design;
- Unique high temperature water-cooled motors for operation up to 2300 F:
- The fan offering provides competitive replacement fans to Garden City, Lau, IGE, Alloy Fabricating fan models; repairs, re-build & balancing.
There are two major types of Tenderall high temperature fans - axial and centrifugal:
Axial Blade Fans:
* The axial blade wheel is usually specified where there is a need for very large volumes of air flows against low static pressure. Axial wheel like the multi-blade forward curve type wheel could cause an axial fan to deliver different air volumes at the same static pressure, if the total pressure requirement of the fan system was underestimated. This type of fan is ideally suited where a large volume of flow is required with a minimum of duct work and is used extensively for small and large furnaces, such as aluminum annealing.
Centrifugal Fan:
* Radial Blade, paddle wheel type fans. This type of wheel is usually specified where there is a necessity for medium volumes of flow against medium to large static pressures. The paddle wheel is considered a self cleaning type of wheel. It could be used where there are various materials or dust in the air stream. Due to its structurally strong design, it is used in many heat treatment applications at very high temperatures where maximum fan longevity is desired.
* Multiblade forward curve wheel. This type of wheel is usually specified where there is a necessity for large volumes of flow against low to medium static pressure requirements. The forward curve blade is that it delivers the same volume of air as either the backward or radial blade wheel, at a lower fan speed, which is important due to wheel stresses at elevated temperatures. This fan is the most common type used in all types of heat treatment operations except where a buildup of material on the blades could occur, as wheel unbalance would result.
High temperature centrifugal fans are available in both housed free-standing fan configuration and in non-housed plug fan / air-kit design. High temperature axial plug fans can be unhoused plug fans with or without fan shroud / diffuser, or in tubeaxial / vaneaxial configuration with forced air belt tunnel colling cooling system by auxiliary cooling blower.
The Tenderall high temperature oven fans line now include:
- Pre-engineered and custom made fans for all types of applications with vaiety of impeller types and accessories;
- Operating up to 2200 F, centrifugal, axial and plug fan types;
- Canada Blower engineers provide a professional advice and recommend a right fan for every application & oven / plenum design;
- Unique high temperature water-cooled motors for operation up to 2300 F:
- The fan offering provides competitive replacement fans to Garden City, Lau, IGE, Alloy Fabricating fan models; repairs, re-build & balancing.
There are two major types of Tenderall high temperature fans - axial and centrifugal:
Axial Blade Fans:
* The axial blade wheel is usually specified where there is a need for very large volumes of air flows against low static pressure. Axial wheel like the multi-blade forward curve type wheel could cause an axial fan to deliver different air volumes at the same static pressure, if the total pressure requirement of the fan system was underestimated. This type of fan is ideally suited where a large volume of flow is required with a minimum of duct work and is used extensively for small and large furnaces, such as aluminum annealing.
Centrifugal Fan:
* Radial Blade, paddle wheel type fans. This type of wheel is usually specified where there is a necessity for medium volumes of flow against medium to large static pressures. The paddle wheel is considered a self cleaning type of wheel. It could be used where there are various materials or dust in the air stream. Due to its structurally strong design, it is used in many heat treatment applications at very high temperatures where maximum fan longevity is desired.
* Multiblade forward curve wheel. This type of wheel is usually specified where there is a necessity for large volumes of flow against low to medium static pressure requirements. The forward curve blade is that it delivers the same volume of air as either the backward or radial blade wheel, at a lower fan speed, which is important due to wheel stresses at elevated temperatures. This fan is the most common type used in all types of heat treatment operations except where a buildup of material on the blades could occur, as wheel unbalance would result.
High temperature centrifugal fans are available in both housed free-standing fan configuration and in non-housed plug fan / air-kit design. High temperature axial plug fans can be unhoused plug fans with or without fan shroud / diffuser, or in tubeaxial / vaneaxial configuration with forced air belt tunnel colling cooling system by auxiliary cooling blower.
Related Tags: gas, high, kit, air, fan, oven, industrial, pressure, temperature, exhaust, circulation, ige, plug, ventilator, blower, centrifugal, circulating, thermo, alloy engineering, garden city, axial
For additional information please refer to www.tenderall.com/index.html.O. ChetchelDesign EngineerTenderall Blower Co.www.tenderall.comwww.tenderall.com/blower/index.html Your Article Search Directory : Find in Articles
Recent articles in this category:
- Work At Home Mums: Making Time For You.
I questioned if this subject would be worthy of a complete article, however it's an vital factor in - Property Investing 7 Reasons Why Now Is A Good Time To Invest
Conventional wisdom has this to say about property investing; the best time to invest in property is - Chocolate Gifts: The Perfect Corporate Gifts For Your Colleagues
It's always a good feeling to give messages of thanks to your colleagues who helped you finish that - Singapore Company For Foreign Entrepreneurs And Business Entities
There are three unique types of Singapore company that have been specifically created for foreign en - Important Objectives Of Packaging
The function of packaging is not simply only physical protection but also marketing, barrier protect - Establish Your New Global Web-based Enterprise Right Now
This is the perfect point in time to set up your global web business.The Internet business field is - The Ups And Downs Of Entrepreneurship
There are two kinds of entrepreneurs. First, there is the entrepreneur that is commonly associated w - Problem Of Funds To Start A Small Business
If you are determined to do some business on your own rather than doing office work in other people' - Do Business Tactfully Incorporating Third Party Logistics!
If you are an experienced entrepreneur, then you can certainly value two major factors; quality work - Home Stagers Can Work As Much Or As Little As They Wish
Many Staging Diva Graduates start out as part-time home stagers because they simply can't afford to
Most viewed articles in this category:
- Starting A Day Care Center Can Be Profitable When Following These Five Ingredients Of Success
The demand for child day care in the US is rising. This is due to many factors including but not lim - Being an Entrepreneur
I have never been the conventional type. I always did something different from everybody else. I jo - It Takes a Decision To Succeed
I am truly amazed at how often I hear people talk about what they want and yet when I ask them if th - A Business Plan-Do You Need One?
There are several uses for a business plan, and each requires the plan to be written somewhat differ - Art Therapy: Array your Art Workshop at Work
There is so much going on in the world today. President Bush is moving things around in Washington. - Proven Income Opportunity Success Stories
There are alot of scams out there claiming that they have a proven income opportunity. I totally agr - Sometimes You Have to Abandon the Experts, Theories and Books and Trust Your Intuition
As the coordinator for the online think tank often we get into debates with experts and Ph.D.'s abou - Mums - Park And Ride Your Way To A Second Income
Have you ever noticed that when you are in a hurry to catch a bus there never seems to be one? Or pe - How to Protect Yourself if Your House Value Drops, or Your Income is Lost - Part 2
Robert Shiller, is the author of the runaway bestseller, Irrational Exuberance. Shiller has recently - Home Business Solutions for Earning a Residual Income
Starting a home business is a huge step. Maybe you want to earn an extra income, extra spending mone