Do You Know How To Refinish A Hardwood Floor?


by Christopher Smith - Date: 2007-06-07 - Word Count: 455 Share This!

Hardwood floors can beautify your home, but like any wood product, they must be properly cared for in order to maintain their luster and elegance. Hardwood floor refinishing is not a difficult process, but is a necessary one if those floors are to be maintained. By putting aside a little time to dedicate to refinishing hardwood floors, they will last for years, keeping that fresh and new appearance free of scratches and scuffs.

Refinishing hardwood floors is a process that encompasses two steps. The first, sanding, removes the buildup of dirt and old wood from the floor's surface, making for a fresh wood surface suitable for working. The other, staining, gives the floor's surface a more polished look.

Before you attempt refinishing your hardwood floor, you should always do this simple test to make sure that it is necessary. All you need to do is place a drop of water on your floor. If it absorbs rather quickly, you need to refinish, but if it doesn't absorb, or it slow at absorbing, you do not need to refinish your hardwood floor at this time.

Before refinishing the floor, you should check that the floor does not need any repair work. All repair work should be completed before refinishing the floor. Examples of problems that require repair are badly stained wood, warped or squeaky floor boards, and other permanent damage.

After making sure your floor is in good repair, begin refinishing by preparing for the messy work of sanding. Start by clearing everything from the room. Cover all doorways, other openings, vents, and light fixtures in the empty room to protect them from all the dust.

A powerful drum sander is the tool to use for your initial sanding. To avoid accidental damage to the wood, keep the drum sander continuously in motion. If it stays in one place, too much wood is lost and your floor is uneven. Move steadily. Don't rush. To get in corners and other tight spots, use an edge sander.

After you finish sanding, clean up the dust and debris. Now, you're ready to stain the floor. There are several kinds of stains available - water based and oil based stains with a variety of appearances. Choose the one that suits your floor best, and follow all instructions given. You should pay special attention to how many coats are needed and how long the stain takes to dry.

Your stain is dry; your floor is done! Offer yourself some congratulations! Refinishing hardwood floors can be difficult, and some hire a professional, but you know how to refinish hardwood floors so you don't need to. This task takes a little time, but when you see your dull floor shining and gleaming again you will know it was all worth it.

Related Tags: floor, refinishing, hardwood, staining, sanding

Visit us for more information on bruce hardwood floors, how to install wood floor, and bruce hardwood floor accessories.

Your Article Search Directory : Find in Articles

© The article above is copyrighted by it's author. You're allowed to distribute this work according to the Creative Commons Attribution-NoDerivs license.
 

Recent articles in this category:



Most viewed articles in this category: