Many areas of misunderstanding exist with regard to soap making. I am often asked "do I have to use lye?" "just how dangerous is lye?" and "will soap making save me money?" "can I really make soap and sell it for a profit?" these and many more questions arrive in my inbox on a daily basis, making it clear to me the extent of misinformation that exists where soap making is concerned.

There are really only two soap making techniques, cold process and hot process. Other techniques referred to as melt and pour and rebatching, are not actually soap making at all, instead they involve melting previously made soaps back to liquid form, then adding fragrance and color, maybe some herbs and grains and then allowing to set again.

True Soap Making involves the chemical reaction which takes place when fats and/or oils are mixed with an alkali such as Sodium Hydroxide, also known as Lye, or Caustic Soda. It's as simple as that really, but more complex than you can imagine.

Aside from the basic fact that a strong alkali in solution will cause a chemical reaction known as saponification when mixed with fats, the exact nature of the resulting soap is dependent upon the type of fat used, the amount of lye, the curing time and a host of other factors all of which combine to make soap making a truly interesting and rewarding craft. I call it a craft because it requires skill and practice, I would prefer not to recall the number of soap batches I made when I was starting out that had to be thrown into the trash. Its important to remember that sometimes it takes a few tries to get it right, but once you've got the process down, homemade soap making is easy and fun. It is a never-ending source of joy because there is always more to learn.

Soap making is an age-old skill that is currently undergoing a popular revival. Home or cottage level soap making is done by the "cold process", however this method is not recommended for children because of the potential danger that lye poses. Soap making is a fascinating, enjoyable and creative hobby, but did you ever realize that it could actually become an excellent source of income. the beauty of soap making is its adaptability to village-sized enterprises, it represents a business that requires little space, with little cost and offers numerous possibilities.

Soap making is a great hobby and makes a wonderful gift because, let's face it, everyone needs it. Homemade soap making is not at all a difficult process. The melt and pour process makes it even easier, although melt and pour is not soap making in its true sense, it is an easy and creative way to make your own soap. It is the easiest of all the methods and is by far the least time consuming.

The most popular soap making process today is the cold process method, where fats such as olive oil react with lye, it is the process that more advanced hobbyists and small business owners use. It is certainly a more complicated way of making your own soap than melt and pour, but can yield much more pleasing results. Cold process is a method of soap making which doesn't utilize any external heat source. Sodium hydroxide, also known as lye, is used in cold process soap making. The cold process yields no waste products of any kind.

Melt and pour soap making is an easy and creative way to make your own soap. Some soap makers prefer melt and pour because the process is easy and allows the soap maker to concentrate more on the aesthetic aspects of soap making. In its simplest form, slice off what you need, melt it, and pour it into your favorite soap molds. Learning how to make melt and pour soap is the easiest soap making method that you can learn. The joy of Melt and Pour Soap Making promotes the making of soap in the home as a fun hobby and economical craft. Learn melt and pour and cold-process soap making basics then try your hand at lotion, lip balm, salt scrubs and more. Melt and pour soap base is pre-made and purchased by the block, a natural soap base is melted and poured in individual shapes. It has become very popular in recent years. Melt and pour is not actual soap making, often called glycerin soap, it can be opaque, colored or clear. Even children, when supervised, can make soap using this method. Typical un-molding time for Melt and Pour soaps is 4 hours, after which it is ready to use. Un-molding time for cold process soaps is 24 hours or more, followed by a curing period that can take as long as four weeks.

If you are careful to shop around for the best deals and buy your ingredients in bulk wherever possible, you can create batches of soap which cost between 20 and 50 cents per bar, less than commercially available soap bars with many times better quality and a lot less than the price of other handmade soaps on the market. This provides the opportunity for a reasonable profit margin should you decide to sell your products, either simply to recoup the cost of your hobby, or to fuel the beginnings of an exciting and profitable business.

Soap making is not hard to do if you are armed with just a little bit of information. It is an age-old skill that is currently undergoing a popular revival. A fun and useful hobby, soap making is a great pastime and makes a wonderful gift because, let's face it, everyone needs it. Cold process soap making is not recommended for children because of the potential danger that lye poses. Melt and Pour soap making is the easiest of all the methods and is by far the least time consuming. Soap making is not just for your grandmother anymore; it has become a popular hobby for many creative and artistic people.

Copyright © 2007 Gary Everson