The most common technique, when washing cars and other vehicles, is done with the use of water and car wash products. You either do this right at your own garage, or you drive your car to the nearest car wash shop. Some car experts say that your vehicle will get destroyed, when you have it washed with water constantly. If you are wondering how to clean your car, when it gets really dirty, there is a new car washing technology. This new discovery is known as the waterless car wash technology. This technique is done with the use of car cleaning products that do not need rinsing with water.

If you want to clean your vehicle with waterless car wash products, there are certain steps that you have to follow. This way, you will be able to wash your car properly. The first step in cleaning your car, through this method, is to prepare the materials that you are going to need. These include waterless washing products and towels made of top-quality microfiber materials. The minimum number of towels that you can use is two. But if your car is really dirty, you can prepare more than two towels.

After you have prepared your waterless car wash needs, you can start with the process of cleaning. The first technique is to wash your car from the top, working your way down. Since the lower panels are the dirtiest, these should be among the last parts to be washed. You should clean each panel with separate towels, so that the dirt from the first one will not stick to the other panel. You might want to wash the roof first, followed by the windows, then the hood, and trunk. The upper panels and lower panels of the door are next. The bumpers are best cleaned last.

Before you wipe the car with the towel, apply it with a waterless car wash spray. You should also spray the car part that you are working on. When the towel and panel are wet, you will be able to make the cleaning process more effective. The first wipe of the towel should be light, while the second wipe done with slight pressure. This way, you will be able to get rid of the contaminants that have not been wiped off. If your waterless car wash product is formulated with wax, you should only use a small amount of it on the windows. If you use a big amount, this can result to smearing.

When you are cleaning your vehicle with a waterless car wash product, do not clean your car if the temperature is below freezing. This is because this type of product is water-based. It will freeze, when it comes into contact with cold surfaces. If your vehicle is heavily caked with mud, you need to have it pressure-washed first. Doing this will remove the heavy and dirty residue. Another important reminder, when cleaning your vehicle with waterless car wash products, is to use a product close to the surface of the car if it is windy. You would not want to lose much of the solution because of the wind.

If you want to buy waterless car wash care products, there are several retailers that provide these. There are shops found near your area, while there are several found online. One online retailer is Go-Waterless, which sells waterless car wash cleaning products and products for valet and car care. Go-Waterless sells car care products that are eco-logical and eco-friendly. It also offers waterless technology that is highly advanced. You can purchase waterless car wash care for the exteriors and interiors of your vehicle. There are even kits for waterless cleaning.