Ccna, Ccnp, And Cisco Security Practice Exam Questions: Ospf Stub Areas, Switches, And More!
- Date: 2008-08-30 - Word Count: 414
Share This!
To help you prepare for total success on your Cisco certification exams, here are some complimentary practice exam questions. Answers are posted at the end of the article. Enjoy!
CCNA Certification And CCENT Certification:
A Cisco switch can take one of three actions with an incoming frame. Name all three and describe under what conditions each action would occur.
.
CCNA Security Certification / CCNP ISCW Exam:
What is SDEE, and what do we use it for?
CCNP Certification / BSCI Exam:
OSPF Total Stub areas can contain which of the following OSPF route types?
A. O
B. O IA
C. O* IA
D. O N1
E. O N2
CCNP Certification / BCMSN Exam:
What command will allow a Cisco switch to accept only secure remote connections? Where should this command be placed?
CCNP / ONT Exam:
What's the difference between the two options shown below by IOS Help? What is the purpose of each?
R1(config)#int s0/0
R1(config-if)#auto ?
discovery Configure Auto Discovery
qos Configure AutoQoS
Here are the answers!
CCNA / CCENT Answer: If the switch's MAC table has no entry for the destination MAC address of the frame, the frame will be flooded - that is, a copy of the frame is sent out every single port except the one it came in on.
If the switch's MAC table does have an entry for the destination MAC address, and the source and destination are shown to be off different ports on the switch, the frame is unicast - sent out only the port leading to the destination address.
If the switch's MAC table has an entry for the destination MAC, and the source and destination are shown to be off the same port, the frame is filtered by the switch - it's not forwarded in any way.
CCNA Security / ISCW Exam Answer: SDEE (Security Device Event Exchange) is an application-layer protocol that allows the exchange of messages between an IPS server and client. SDEE pulls logs from our routers, and these logs can be viewed in SDM.
BSCI Answer: Here's a quick review of the OSPF route types the different stub area types can contain:
Stub areas can contain O, O IA, and O* IA routes.
Total stub areas can contain O and O* IA routes only.
NSSAs can contain O, O IA, O N2, O* N2, O N1, and O* N1 routes.
BCMSN Answer: Just put the transport input ssh command on the VTY lines.
ONT Answer: Answer: Enabling Auto Discovery will begin the process of discovering the traffic types and flows on that interface; the auto qos command begins the process of generating and applying the MQC-based policy.
Look for more practice exams and tutorials on my website!
CCNA Certification And CCENT Certification:
A Cisco switch can take one of three actions with an incoming frame. Name all three and describe under what conditions each action would occur.
.
CCNA Security Certification / CCNP ISCW Exam:
What is SDEE, and what do we use it for?
CCNP Certification / BSCI Exam:
OSPF Total Stub areas can contain which of the following OSPF route types?
A. O
B. O IA
C. O* IA
D. O N1
E. O N2
CCNP Certification / BCMSN Exam:
What command will allow a Cisco switch to accept only secure remote connections? Where should this command be placed?
CCNP / ONT Exam:
What's the difference between the two options shown below by IOS Help? What is the purpose of each?
R1(config)#int s0/0
R1(config-if)#auto ?
discovery Configure Auto Discovery
qos Configure AutoQoS
Here are the answers!
CCNA / CCENT Answer: If the switch's MAC table has no entry for the destination MAC address of the frame, the frame will be flooded - that is, a copy of the frame is sent out every single port except the one it came in on.
If the switch's MAC table does have an entry for the destination MAC address, and the source and destination are shown to be off different ports on the switch, the frame is unicast - sent out only the port leading to the destination address.
If the switch's MAC table has an entry for the destination MAC, and the source and destination are shown to be off the same port, the frame is filtered by the switch - it's not forwarded in any way.
CCNA Security / ISCW Exam Answer: SDEE (Security Device Event Exchange) is an application-layer protocol that allows the exchange of messages between an IPS server and client. SDEE pulls logs from our routers, and these logs can be viewed in SDM.
BSCI Answer: Here's a quick review of the OSPF route types the different stub area types can contain:
Stub areas can contain O, O IA, and O* IA routes.
Total stub areas can contain O and O* IA routes only.
NSSAs can contain O, O IA, O N2, O* N2, O N1, and O* N1 routes.
BCMSN Answer: Just put the transport input ssh command on the VTY lines.
ONT Answer: Answer: Enabling Auto Discovery will begin the process of discovering the traffic types and flows on that interface; the auto qos command begins the process of generating and applying the MQC-based policy.
Look for more practice exams and tutorials on my website!
Related Tags: security, ccna, cisco, ccnp, voice, wireless, area, ospf, filter, forward, bsci, switch, ont, iscw, bcmsn, stub
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNA Security certification tutorials.Get your CCNA exam with this special offer from The Bryant Advantage! Your Article Search Directory : Find in Articles
Recent articles in this category:
- Forum Community: The Virtual Squares Of The It Era
After the first impact with its Latin name, the language normally used in the forum communities actu - Become Mcts Certified! Make A Career Move Today
About MCTS Certification and MCITP Certification Microsoft's MCTS Certification (Microsoft Certified - Iseb And Istqb Software Testing Certifications - The History
The 2 main software testing certification paths are the ISEB and ISTQB, and both have been around fo - Presentation Skills For Trainer In Corporate Training
Corporate TrainingWorking in an office, a common problem is that you have great ideas: perfect ideas - Sap And Abap Training Course In London
The name SAP a German company is an acronym for "Systems, Applications, and Products in Data Process - Selecting The Right Comptia Training Revealed
Training for your CompTIA A+ has four specialist sections - you need to pass exams in just two secto - Networking Training Companies Described
In today's high speed society, support workers who can mend computers and networks, and give regular - Mcse Training Courses In India For A Better Future
The competition is very tough these days, especially in the corporate world. In order to stand out f - C Programming Career Courses Clarified
There are a range of options on the market for individuals looking to get into working with computer - Mcse Courses In The Uk Considered
Because you're looking at information about Microsoft MCSE's, the chances are you're in one of these
Most viewed articles in this category:
- The Road To CVoice
Cisco VOICE over IP (CVOICE) exam represents one of the building blocks of few Cisco VoIP certificat - Lessons Learned From The PMP Certification Exam
There are many methods for you to prepare for the grueling 4 hour PMP Exam. We've outlined a few of - Cisco CCNA And CCNP BCRAN Exam Training: Frame Relay PVC, SVC, DLCI, and Map Statements
In today's CCNP certification tutorial, we'll concentrate on the BCRAN exam and Frame Relay PVCs, SV - Why Go To College?
Education is an investment, though, and the fact is that while people pay a lot to go college, they - Computer Programmer
According to the BLS, employment in computer and software programming is projected to increase 68 pe - Microsoft Vista Certification Exams Announced
Microsoft Vista certification is on the way, and Microsoft recently announced the first Vista exams. - Novell Networking Technologies Exam
Novell Networking Technologies exam (050-632) is a part of the Novell CNE (Certified Networking Engi - CCNA Certification Exam Training: Doing Your Best On Test Day
CCNA certification is tough enough without you making it tough on yourself. There are a few simple - Network+ Exam Certification Tutorial: The Bus Topology
The Physical layer of the OSI model isn't the most exciting or interesting to work with, but it's th - Cisco CCNP BSCI 642-901 Tutorial: Clear Text OSPF Neighbor Authentication
An OSPF adjacency can be authenticated with MD5 (Message Digest 5) or with a clear-text password. I