Underfloor Heating - The Importance Of Having The Right Base
- Date: 2008-11-09 - Word Count: 811
Share This!
Andy Nevitt, a screed flooring expert from CEMEX UK, the leading building materials provider, talks about what architects, developers and self builders need to know when choosing screeds to use over underfloor heating systems.
Underfloor heating systems have steadily grown in popularity with homeowners over the past decade with the underfloor heating trade association UHMA recording system installation numbers increasing year on year. Once reserved only for bigger developments such as hospitals and schools there has been a growing trend in recent years for house builders and developers to install underfloor systems as a first choice in new homes. They are easy and cost effective to install and can save the homeowner up to 30% on fuel bills compared to traditional hot water systems using radiators.
However, despite its obvious benefits, there are many factors that need to be considered even before deciding to opt for an underfloor heating system. One of the most important decisions is the material which would cover the system and will optimise the effectiveness of the system once installed.
Considerations
Screed has been identified as a perfect partner for underfloor system applications. It encapsulates the under floor heating elements and diffuses the heat across the floor surface providing an even temperature in the room.
Before any architect or contractor specifies or installs an underfloor heating system, it is imperative that they understand which screed is best to use in a given situation and recognise the different methods of floor construction during the design stage.
The contractor should also consider different thickness requirements associated with specific screed types, how much room they have to lay the screed and how the floor will be insulated.
Laying screed
It is vital to install the screed as early as possible in the construction process as the curing and drying of the product is critical to its long term performance. The screed must be laid after the roof; window and external doors have already been installed to protect it from the elements of rain, wind and sun as this can have a detrimental effect on the product. It also ensures a more consistent environment for the initial curing. Once the screed has been laid, and depending on whether a self compacting or traditional mix is used, it is essential the product has been left to cure before it is dried.
Traditional v Flowing screeds
The type of screed used will depend on the type of application. The industry has tended to use a traditional Portland cement-based screed as opposed to the flowing variety which has a calcium sulfate binder.
Over recent years architects and contractors have come to realise the benefits of using a flowing screed application compared to the traditional mix as they experience an improved end performance and cost savings.
Flowing Screeds
Combining underfloor heating with flowing screeds offers significant benefits. However, it is essential that the heating system specified has been designed for use with flowing screeds.
Reduced screed thickness: the properties of a flowing screed mean that it can be laid at approximately half the thickness, around 50mm overall thickness compared to 90mm for sand/cement screed. This results in less material but a stronger, more consistent quality and a neater finish.
Quicker application: flowing screed can be laid at a faster rate than a sand /cement screed due to the thinner application and accuracy of placement. A flowing screed will move around the pipe system giving void-free intimate contact that would be difficult to achieve using a sand/cement screed.
Evenness of heat: The close contact of the screed with the heating system allows heat to spread evenly and reach an optimum temperature quicker. Conversely when the heating is switched off, the screed also cools much quicker. The heating system is therefore more responsive and has improved energy efficiency compared to systems using traditional sand/cement screeds.
Time savings: Reduced curing times and its speed and efficiency of application means contractors can shave weeks off a project. Its ability to dry and cure quicker means the area is available sooner to other trades to continue working.
Finish: As flowing screed is self-compacting it also provides a smoother finish and there is also minimal lateral shrinkage because of the calcium sulfate binder.
Traditional Screeds
Traditional screed products should not be forgotten and there are some situations where they are preferable - the construction of wet rooms, commercial kitchens and shower areas are better suited to traditional mixes due to the continual contact with water and then drying out. The physical make-up of flowing screed means a constant contact with water could gradually debond and degrade it.
Finishing Touches
Finally, when the screed has been laid and dried it is best practice to prime or seal the top of the screed before a finish like tile or marble is applied as this will increase the effectiveness and preserve longevity of the screed.
Underfloor heating systems have steadily grown in popularity with homeowners over the past decade with the underfloor heating trade association UHMA recording system installation numbers increasing year on year. Once reserved only for bigger developments such as hospitals and schools there has been a growing trend in recent years for house builders and developers to install underfloor systems as a first choice in new homes. They are easy and cost effective to install and can save the homeowner up to 30% on fuel bills compared to traditional hot water systems using radiators.
However, despite its obvious benefits, there are many factors that need to be considered even before deciding to opt for an underfloor heating system. One of the most important decisions is the material which would cover the system and will optimise the effectiveness of the system once installed.
Considerations
Screed has been identified as a perfect partner for underfloor system applications. It encapsulates the under floor heating elements and diffuses the heat across the floor surface providing an even temperature in the room.
Before any architect or contractor specifies or installs an underfloor heating system, it is imperative that they understand which screed is best to use in a given situation and recognise the different methods of floor construction during the design stage.
The contractor should also consider different thickness requirements associated with specific screed types, how much room they have to lay the screed and how the floor will be insulated.
Laying screed
It is vital to install the screed as early as possible in the construction process as the curing and drying of the product is critical to its long term performance. The screed must be laid after the roof; window and external doors have already been installed to protect it from the elements of rain, wind and sun as this can have a detrimental effect on the product. It also ensures a more consistent environment for the initial curing. Once the screed has been laid, and depending on whether a self compacting or traditional mix is used, it is essential the product has been left to cure before it is dried.
Traditional v Flowing screeds
The type of screed used will depend on the type of application. The industry has tended to use a traditional Portland cement-based screed as opposed to the flowing variety which has a calcium sulfate binder.
Over recent years architects and contractors have come to realise the benefits of using a flowing screed application compared to the traditional mix as they experience an improved end performance and cost savings.
Flowing Screeds
Combining underfloor heating with flowing screeds offers significant benefits. However, it is essential that the heating system specified has been designed for use with flowing screeds.
Reduced screed thickness: the properties of a flowing screed mean that it can be laid at approximately half the thickness, around 50mm overall thickness compared to 90mm for sand/cement screed. This results in less material but a stronger, more consistent quality and a neater finish.
Quicker application: flowing screed can be laid at a faster rate than a sand /cement screed due to the thinner application and accuracy of placement. A flowing screed will move around the pipe system giving void-free intimate contact that would be difficult to achieve using a sand/cement screed.
Evenness of heat: The close contact of the screed with the heating system allows heat to spread evenly and reach an optimum temperature quicker. Conversely when the heating is switched off, the screed also cools much quicker. The heating system is therefore more responsive and has improved energy efficiency compared to systems using traditional sand/cement screeds.
Time savings: Reduced curing times and its speed and efficiency of application means contractors can shave weeks off a project. Its ability to dry and cure quicker means the area is available sooner to other trades to continue working.
Finish: As flowing screed is self-compacting it also provides a smoother finish and there is also minimal lateral shrinkage because of the calcium sulfate binder.
Traditional Screeds
Traditional screed products should not be forgotten and there are some situations where they are preferable - the construction of wet rooms, commercial kitchens and shower areas are better suited to traditional mixes due to the continual contact with water and then drying out. The physical make-up of flowing screed means a constant contact with water could gradually debond and degrade it.
Finishing Touches
Finally, when the screed has been laid and dried it is best practice to prime or seal the top of the screed before a finish like tile or marble is applied as this will increase the effectiveness and preserve longevity of the screed.
Related Tags: cement, asphalt, cemex, readymix concrete, ready mix concrete, readymixed, ready-mix, ready mix, aggregates
CEMEX is a global building materials company and leading supplier of cement, ready-mixed concrete and aggregates. In the UK, CEMEX also has a significant share of the asphalt, concrete block and mortar markets. The company has a national supply network in the UK with over 500 locations, to ensure that quality building materials is available to customers locally.
Your Article Search Directory : Find in ArticlesRecent articles in this category:
- The No. 1 Rule For Projecting Confidence - Speak With Authority
One of the most important characteristics a person can project in a business setting - or any situat - After the Autumn Checkout European Debt Crisis and U.S. Brewing Rebound
In the commotion caused by the Fed on interest rates come to an end, the "disastrous" for the euro a - Advantages Of Arcade Game Rentals
There are many different advantages to arcade game rentals. Most people need something to release th - A General Primer on Truck Cargo Nets
In modern highways it is quite rare to see truck cargo nets in action, this is because they are usua - The United States Will Burst More Severe Financial Crisis
Not long ago, suddenly announced that the central bank to raise interest rates, the interest rate hi - Niche Marketing Profits - 3 Easy Steps to Finding a Profitable Niche Market Income in 10 Minutes
Like most beginners I was having a very difficult time trying to find a niche market to earn extra m - The Importance of Hospitality Management Consulting Firms Toronto
Businesses and the managers that help guide any business are in a constant state of improvement and - New Keynesian Theory Label
2010 winner of the Nobel Prize in Economics three theories have been labeled as "New Keynesian" labe - Federal Reserve Pouring Money QE2 Unpredictable Fortune
U.S. economist Milton Friedman proposed a "throw the cash from a helicopter" view, while the practic - Fiscal Consolidation Should no Longer Delay
British Chancellor of the Exchequer George Osborne today announced fiscal consolidation policy, shoc
Most viewed articles in this category:
- Common Financial Problems to Avoid
One must first change their habits and not procrastinate. American Consultants Inc at offers key fi - How a Bad Hire Can Hurt Your Business
What's worse - hiring the wrong person or not hiring anyone at all? Companies can become almost des - Joel Comm Is Dr. Adsense
What is Adsense? If you are new to making money online and net marketing, you may not know what Ads - 5 Steps For A Dynamic Wealth System Online
Recipe: Opportunity + knowledge + Dynamic Wealth System + Your Action = Massive Success!!! Step 1 - How To Stop Foreclosure
Losing your house to a foreclosure can be very scary. There are times when circumstances are ou - How to Always Pitch A Strike
As business owners, we are always working on new ways to convince people to become customers, client - Membrane Diffuser Solutions for Wastewater Treatment Systems
In the aeration basin of a typical wastewater treatment plant there are both organic and inorganic m - Another Year Hating Your Job or Loving Life?
Copyright © 2007 Mary Foley I've come to the conclusion that to be successful - really successf - Dyestuff Industry In India And China
World demand for dyes and organic pigments to touch $10.6 billion in 2008According to a study on dye - Cma-cgm Case : the Series of Lawsuits Continues in Syria, Lebanon, Egypt, France, England and the United States
Damietta company case : The series of lawsuits continues in Syria, Lebanon, Egypt, France, England a