Cisco CCNA Certification: The Proper Use Of Default Static Routes


by Chris Bryant - Date: 2006-11-30 - Word Count: 345 Share This!

Earning your Cisco CCNA certification means knowing the details of Cisco routing, and that includes knowing when Cisco routing terms don't quite mean what they sound like they mean. For example, the general meaning of "default" is a setting that is used unless you or I change it. On the other hand, a default route is a route taken by packets that have no other route they can take. Let's take a look at how a default static route is configured and used on a Cisco router.


Here's our current routing table:


Gateway of last resort is not set



1.0.0.0/32 is subnetted, 1 subnets


C 1.1.1.1 is directly connected, Loopback0


172.12.0.0/16 is variably subnetted, 2 subnets, 2 masks


C 172.12.13.0/24 is directly connected, Serial1


C 172.12.21.0/30 is directly connected, BRI0



If we have packets destined for the network 15.1.1.0 /24, the packets will be dropped by this router. There's no match in that routing table for that network and the gateway of last resort is not set.


We could configure a static route to the 15.1.1.0 /24 network, but instead we'll use a default static route. The hardest part of configuring that route type is getting used to the odd syntax! As with any other static route, we can use the IP address of the next-hop router or the local router's exit interface. Here, we'll send any traffic with no more-specific match in the routing table out the local router's Serial1 interface.


R1(config)#ip route 0.0.0.0 0.0.0.0 serial1


Let's take a look at the routing table now.


Gateway of last resort is 0.0.0.0 to network 0.0.0.0



1.0.0.0/32 is subnetted, 1 subnets


C 1.1.1.1 is directly connected, Loopback0


172.12.0.0/16 is variably subnetted, 2 subnets, 2 masks


C 172.12.13.0/24 is directly connected, Serial1


C 172.12.21.0/30 is directly connected, BRI0



S* 0.0.0.0/0 is directly connected, Serial1


A gateway of last resort has now been successfully configured, and the S* means that last route in the table is a static default route. Remember, the default route is not the route that all packets will take - it's the route packets use if there is no other possible match for their destination in the routing table.

Related Tags: certification, resort, ccna, cisco, static, table, router, last, default, route, s*, routing, 0.0.0.0

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of over 100 free certification exam tutorials, including Cisco CCNA certification test prep articles. His exclusive Cisco CCNA study guide and Cisco CCNA training is also available!Visit his blog and sign up for Cisco Certification Central, a daily newsletter packed with CCNA, Network+, Security+, A+, and CCNP certification exam practice questions! A free 7-part course, "How To Pass The CCNA", is also available, and you can attend an in-person or online CCNA boot camp with The Bryant Advantage! Your Article Search Directory : Find in Articles

© The article above is copyrighted by it's author. You're allowed to distribute this work according to the Creative Commons Attribution-NoDerivs license.
 

Recent articles in this category:



Most viewed articles in this category: