Sex May Prolong Life
- Date: 2007-02-12 - Word Count: 669
Share This!
If ever you fancy a try at stone carving your own house sign or even a stab at sculpture, it might be of some help to understand the various tools and their uses.
There are basically three different sets of tools depending on the type of stone or marble you are intending to use, though there is a fair bit of overlap. Some tools being useful on almost any type of material.
Wood Handled Masons chisels: For working with softish sandstone's, i.e.; Bathstone, Cotswold etc. These look similar to the wood working chisels commonly available. However, the steel is tempered differently and they are heavier duty . They come in a wide variety of sizes and shapes.
These specialist chisels are used with a lead dummy. A lead dummy is a kind of mallet, basically a lead cylinder about 2 inches in diameter and 3 inches high mounted on a wooden handle.
Bulb End steel chisels: These steel chisels are heavier duty tools than the wood handled type and are used for working harder limestone's such as Portland
stone. They come in a wide variety of sizes and shapes.
These chisels are designed for use with a traditional wooden masons mallet. These round shaped mallets made from Italian Yew come in various sizes and weights, from four inches in diameter to nine inches.
Steel End steel and tungsten chisels: These chisels are for use with a steel hammer, either a large masons steel hammer or a steel club hammer. The choice of hammer will depend on the task in hand.
These chisels are the most commonly available and are made in a huge range of sizes and shapes. As a carver you will be more concerned with the smaller tools.
Individual chisels are named according to use and size. So for instance carving chisels are called "splitters" (I don't know why just trust me!). So you can have a quarter inch splitter or half inch splitter etc.
Here is a list of the various types.
Point or Punch: Pointed chisel usually for roughing out or getting rid of waste material.
Bolster: Any flat bladed chisel with a straight edge, from half inch to four inches.
Splitter: Small chisels for fine work such as carving or letter cutting.
Claw or Comb: Toothed chisel for taking off waste material in a controlled way, creating a roughly flat finish.
Pitcher: Flat bladed chisel with a blunt wedge like edge for taking off large chunks of waste material, needs lots of experience to use, not for the faint hearted!
Bullnose: As the name suggests, a flat chisel with a rounded edge for creating curved surfaces.
Scallop: Similar too a bullnose chisel but the blade is hollowed like a half section of tube, steel tools only, for use on softer materials.
Carvers and Masons will often shape the tools they need from existing chisels to suit particular jobs. Creating bullnose chisels from bolsters or shaping small splitters to get into awkward corners.
Steel tools re-shaped in this way will need re-tempering, tungsten tools can be used without this need and are the best choice for beginners.
If this is your first stone carving project I suggest you buy just two chisels, a half inch and a quarter inch tungsten splitter. If you need a shaped chisel just shape one of your chisels as needed on a grindstone. In addition search out the smallest steel club hammer you can find , if its an old one so much the better, cut down the handle to just five or six inches, it will be much easier to use!
For your first project why not carve your own house sign? Its a relatively simple project and if you hang it out side your house you will be showing off your work to every visitor to your home!
Steve Walker has been a craftsman in stone and marble for 40 years and in his long career has practised as a stone mason, letter cutter, restoration carver, marble mason, fireplace designer and manufacturer.
He now makes engraved stone house signs. www.stoneengravings.co.uk StoneEngravings House signs
There are basically three different sets of tools depending on the type of stone or marble you are intending to use, though there is a fair bit of overlap. Some tools being useful on almost any type of material.
Wood Handled Masons chisels: For working with softish sandstone's, i.e.; Bathstone, Cotswold etc. These look similar to the wood working chisels commonly available. However, the steel is tempered differently and they are heavier duty . They come in a wide variety of sizes and shapes.
These specialist chisels are used with a lead dummy. A lead dummy is a kind of mallet, basically a lead cylinder about 2 inches in diameter and 3 inches high mounted on a wooden handle.
Bulb End steel chisels: These steel chisels are heavier duty tools than the wood handled type and are used for working harder limestone's such as Portland
stone. They come in a wide variety of sizes and shapes.
These chisels are designed for use with a traditional wooden masons mallet. These round shaped mallets made from Italian Yew come in various sizes and weights, from four inches in diameter to nine inches.
Steel End steel and tungsten chisels: These chisels are for use with a steel hammer, either a large masons steel hammer or a steel club hammer. The choice of hammer will depend on the task in hand.
These chisels are the most commonly available and are made in a huge range of sizes and shapes. As a carver you will be more concerned with the smaller tools.
Individual chisels are named according to use and size. So for instance carving chisels are called "splitters" (I don't know why just trust me!). So you can have a quarter inch splitter or half inch splitter etc.
Here is a list of the various types.
Point or Punch: Pointed chisel usually for roughing out or getting rid of waste material.
Bolster: Any flat bladed chisel with a straight edge, from half inch to four inches.
Splitter: Small chisels for fine work such as carving or letter cutting.
Claw or Comb: Toothed chisel for taking off waste material in a controlled way, creating a roughly flat finish.
Pitcher: Flat bladed chisel with a blunt wedge like edge for taking off large chunks of waste material, needs lots of experience to use, not for the faint hearted!
Bullnose: As the name suggests, a flat chisel with a rounded edge for creating curved surfaces.
Scallop: Similar too a bullnose chisel but the blade is hollowed like a half section of tube, steel tools only, for use on softer materials.
Carvers and Masons will often shape the tools they need from existing chisels to suit particular jobs. Creating bullnose chisels from bolsters or shaping small splitters to get into awkward corners.
Steel tools re-shaped in this way will need re-tempering, tungsten tools can be used without this need and are the best choice for beginners.
If this is your first stone carving project I suggest you buy just two chisels, a half inch and a quarter inch tungsten splitter. If you need a shaped chisel just shape one of your chisels as needed on a grindstone. In addition search out the smallest steel club hammer you can find , if its an old one so much the better, cut down the handle to just five or six inches, it will be much easier to use!
For your first project why not carve your own house sign? Its a relatively simple project and if you hang it out side your house you will be showing off your work to every visitor to your home!
Steve Walker has been a craftsman in stone and marble for 40 years and in his long career has practised as a stone mason, letter cutter, restoration carver, marble mason, fireplace designer and manufacturer.
He now makes engraved stone house signs. www.stoneengravings.co.uk StoneEngravings House signs
Related Tags: house signs, engraved stone, house numbers, yorkstone house signs, granite signs, slate house numbers
Your Article Search Directory : Find in Articles
Recent articles in this category:
- Important Things to Know About an Assisted Living Residence in Texas
n assisted living residence is a facility designed for senior citizens or persons with disabilities - Understanding How the Probate Process Works
The probate process is required within the U.S. to settle estates of deceased persons. The time requ - Fun Ideas for the Family During the Christmas Holiday
The Yuletide season is one of the most awaited holidays of the year because it is the time for joy a - How To Find The Right Composite Decking Deck Builders
Another rising home improvement project homeowners are starting to do a lot more of is the composite - Every Home Should Have A Radiant Barrier
The most easy and successful home improvement project you can do to your House, would be to install - The Different Types Of Rain Gutters
When purchasing a house or planning to do improvements to a home, there is always one project that s - How To Get The Best Replacement Windows For Your Home
Installing replacement windows can be the single most important home improvement project you can do - Holiday Accommodation Gold Coast: Pointers For Selecting The Best
With a multitude of holiday accommodations in Gold Coast, choosing the one for yourself can be quite - Want Holiday Accommodation In Gold Coast Queensland? Get Online To Find The Best Deal In A Quick, Co
There are several ways to find holiday accommodation in Gold Coast. You may refer to travel guides t - Celebrate The Ten-days Festival Of Navratri.
Dasara known as Dussehra, Navaratri, Vijaya Dashami is a festival of triumph of GOOD over Evil. The
Most viewed articles in this category:
- Adoptees Need Support When Voicing Feelings about Birth Parents
"I feel like a mistake.""I'm not like them.""Where's my family?""Why can't I find a suitable career? - Progressive Cooking: All About 'cuisine'
The French are known for their interest in art and all that is fine. It therefore comes as no surpri - Moroccan Decor - Oh My! Make Your Home Shine With Moroccan Rugs and Tapestries.
It is said in Morocco that he who enters Fez with a rug will leave with a moneybag. This saying o - Online Criminal Background Checks-Importance & Ease
Have you ever thought your new neighbor looks like one of the pictures on the post office bulletin b - Installing A Burglar Alarm
Want to protect your home? Ready to install a burglar alarm? The popularity of the home burglar ala - Lowe's Backyard Playground Sets
Lowe's is an excellent first place to look for anyone who is looking for the best swing sets on the - How Could Short Term Health Insurance Help Me?
Short-term health insurance plans allow people to have health insurance for a limited amount of time - Watch Out For Those Stinky Skunks!
There are various species of skunks found throughout the United States including the striped, spotte - Asthma In Kids: An Increasing Epidemic
Many believe that the majority of asthma cases are confined to adults, but this is definitely an inc - Stairlifts For Riders Of Above Average Weight
A stairlift is an affordable device that is used to give people with limited mobility access to the